The wheelhouse covers consist of two side panels, 3 angles and two rear triangular backing plates. To reduce weight the bottom angle has an inferior thickness to the two top angles. This bottom angle is available in different heights. If not required, it is not essential to mount this angle.
We can also supply wheelhouse covers with one of the two side panels cut to size to be mounted in vans which have elongated wheelhousing such as: Citroen Berlingo - Peugeot Ranch - Renault Kangoo - Renault Master - Opel Movano
The wheelhouse covers can be supplied with doors.The doors mount a parallelogram hinge, two gas springs and incorporate a synchronizing tube.These doors are not only safe, but also maintenance free.
Wheelhouse cover with door.You can see this advanced hinge system in the photo.
The models of wheelhouse covers with doors can also be supplied with one of the two side panels cut to size.
The new patented door panel incorporating an innovative rotational sliding system. It swings to the open position down and out of the way, leaving the storage compartment completely free to load, unload or access materials. The panels are free of protruding parts and are constructed in high-strength steel – both factors making them extremely durable and long-lasting.
Opening and closing couldn't be simpler. To open the door, you lift it upwards and then pull it outwards. To close it, you must push it inwards, and thanks to patented rotational sliding system, it swings smoothly back into the closed position and it is automatically blocked shut.
As with all Syncro components the pieces are modular. The wide-open door panels and hinged door flaps can be used together, making it easy to stow even cumbersome materials. As you can see in the photo, the wide-open door panel is fixed above the door flap allowing for 'wide-open' access to the compartment.
This element permits easy access to items stored on the inside of the storage space and safely secures the cargo.
After positioning the cases, just push the shuttle until the cases are blocked.
The shuttle automatically stop in the right position.
To release the shuttle push the lever on the top of it.
The new one cases blocking system with strap allows you to block the cases in a simple and fast way.
Additionally, it is equipped with a strap with buckle for a more effective blocking.