THE VAN RACKING SPECIALISTS
A Fiat Scudo with racking for a crane maintenance firm
If your work involves servicing industrial equipment and machinery, you know how many tools, spares and items of hardware you need to carry with you. Sometimes you also need to take a large part, if not a complete machine back to your base for maintenance.
On this page you can see a racking system designed by Syncro System for a Fiat Scudo L1 H1 owned by a company that repairs and services lifting equipment like cranes and forklifts.
The configuration is simple but practical, with racking on both sides and free floor space at the side door. Let’s take a closer look!
If you don’t have much space, you need perfect order!
Syncro System racking solutions are always fully customised to meet the needs of the user. There are no fixed rules that have to be respected when combining racking and accessories or limits on what can be done.
Syncro’s expert fitters know that:
- Every requirement must be understood and treated as an “order”. When the finished vehicle is returned, it must fully meet the customer’s expectations. (Almost 100% of Syncro customers confirm this.)
- The van’s racking system must be able to keep everything in perfect order.
- And the smaller the van, the more order is needed!
- Liners are essential to extending the working life of the vehicle and saving the owner money!
Liners: the friends of your van’s bodywork
Syncro never tires of repeating this: robust floor and wall liners protect your van’s bodywork against all the inevitable wear and damage associated with daily use. Have you ever dropped a hammer or other heavy tool? If so, you know that without a floor liner, a dent in the floor is inevitable!
Have you ever toppled over heavy items when loading in a hurry? If so, you know that without wall and door liners, the result is inevitably a scratch or dent that not only spoils your van’s appearance but also invites rust.
The level of protection you actually need depends, of course, on the job you do and the location of the racking.
In this Fiat Scudo L1 H1, for example, only the floor has been protected by installing a pre-shaped floor liner made from marble-look plywood with steel cups for the original anchor rings and steel profiles at all exposed edges to protect the plywood.
The left of the Fiat Scudo: how to carry a lot without clutter
If the aim is to keep everything in perfect order, then the Syncro racking system in this Fiat Scudo for servicing lifting equipment has certainly hit the mark.
All the storage compartments are fully or partly enclosed and the area of floor between the side door and the opposite wall is left clear for carrying bulky equipment, spares or materials.
The racking on the left of the van comprises a floor-level compartment with a patented lift-and-rotate door, four large drawers with non-slip mats and automatic latching mechanisms, and two configurable shelves.
A paper roll holder and two small cable holders have been added to the side panel near the rear doors.
The right of the Fiat Scudo: more storage and a space-saving work bench
The configuration on the right of the Scudo partly mirrors that on the opposite side, with the same enclosed compartment over the wheel arch and two shelves at the top. The central section, however, has been divided into two columns with six metal drawers on the right and five case trays on the left.
The rear-facing side panel on this side of the van is equipped with a fold-away bench with a metal vice. This bench takes up very little space when closed, but folds down easily to provide a stable work surface thanks to its extremely robust design. With a bench like this, even a small van can have a sturdy and spacious work surface!
A metal storage pocket is located in the space behind the bench.
What’s so special about Syncroblock bar?
The bulkhead of this Fiat Scudo is equipped with an accessory as simple as it is versatile: a length of Syncroblock bar combined, in this case, with a hook and strap lashing system. Syncroblock bar equipped in this way provides a perfect solution to one of the user’s requirements: to secure cargo in this area.
But Syncroblock bar is more than just another cargo retaining accessory. Browse the accessories section of the Syncro catalogue to discover just how many accessories can be used with it.
For example? Cable holders, adjustable telescopic hooks, magnets, cable reels and more.
Syncro racking can make your small van just as practical as a large one!
Syncro designs hundreds of racking systems every day for as many vans, small and large. So don’t worry about the size of your van. We can turn any make and model into a super-functional mobile workshop!
View other Fiat Scudo racking solutions
View other racking systems for servicing lifting equipment
To work more efficiently, all you need do is contact Syncro System as soon as possible to arrange an appointment. We offer free advice and can help you design the perfect custom racking solution for your professional needs!
SEND YOUR REQUEST!!!
OUR CUSTOMER SERVICE TEAM WILL CONTACT YOU AS QUICKLY AS POSSIBLE.
A FREE OFFER