A Transporter L1 H1 for an air filtration service

A Volkswagen Transporter racking system for an air filtration service

Satisfying every need expressed by customers is not always easy, but it’s what Syncro System does best. Once the solution to this puzzle starts to emerge during the initial consultation, the picture can be completed in a very short space of time. By the time the van is handed back to the customer, Syncro’s racking technicians have fine-tuned all the details and found the perfect combination of racking and accessories to ensure total customer satisfaction!

The van presented on this page is a Volkswagen Transporter L1 H1 owned by a company that installs and services air filtration systems.

The van was first fitted with interior liners, then racking was installed only on the bulkhead and a selection of accessories and equipment essential for the type of work involved was added as a final step. Let’s take a closer look.

Selecting the right liners for the cargo compartment

Protecting the interior of your van is a must, as it allows the vehicle to withstand intensive daily use.

Having said this, the choice of what liners to install depends on various factors: the way you intend to use the cargo compartment, the type of cargo and equipment you plan to carry, and which surfaces are going to be covered by racking and which left unprotected.

Nearly every surface In this Transporter has been protected! The only part not covered by a liner is the bulkhead, and this is completely hidden by racking. The floor is protected by a plywood floor liner with a marble-look finish while the walls, roof and the exposed parts of the doors are protected by steel panelling. Even the wheel arches have been covered in using steel top profiles and aluminium side panels. The result is a van that looks attractive and tidy, is easy to clean and resists intensive wear and tear throughout!

Racking in just one area: how to save space and get the most out of your Transporter

The racking in this Volkswagen Transporter is concentrated at the bulkhead, leaving the side walls clear!

The system is configured as follows:

  • a floor-level compartment, partly enclosed by a patented lift-and-rotate door to increase storage capacity
  • a second, smaller floor-level compartment fitted with hooks and lashing straps
  • three metal drawers with non-slip mats and internal space dividers
  • a case tray with Syncro’s patented latch mechanism and release button in the front panel
  • a configurable shelf
  • a MultiBox cabinet of 10 pull-out transparent containers, complete with aluminium space dividers for optimised organisation; transparency is the added value of this type of racking: the containers are made of PMMA, a super-strong plastic that does not yellow or crack; PMMA offers all the advantages of transparency without the fragility typical of other clear plastics
  • a vice bench which extends through the van’s side door, complete with a metal vice and a protective panel of aluminium chequer plate on the side of the racking

A portable loading ramp for maximum convenience in the Transporter

Both side walls of this Transporter for an air filtration service have been left completely free except for cargo retaining accessories.

A milled bar has been installed along the left side wall. Used in conjunction with a heavy-duty lashing strap and the top of the wheel arch liner, this allows the van to carry a portable WM ramp.

A ramp is an indispensable piece of equipment for avoiding injury and unnecessary fatigue when heavy machinery or equipment has to be loaded and unloaded daily. Syncro supplies and installs a wide selection of ramps, all made in Italy by WM. Ask your dealer for more information!

Accessories to suit all tastes from Syncro

The accessories installed in this VW Transporter L1 H1 do not finish with the ramp.

Cargo retention: In addition to the lashing system described above, the Syncro team also installed a second section of milled bar with hooks and strap along the middle of the right-side wall. In addition, two lengths of milled rail with Airline profiles and lashing straps have been fixed vertically to the rear-facing surface of the bulkhead racking and a large metal storage pocket has been added near the side door.

Cleaning: The van also boasts a paper roll holder, one of the best-sellers of the Syncro accessory range.

Lighting: Two LED tube lights under the roof ensure uniform interior lighting.

Don’t waste another minute – contact Syncro System now for an obligation-free consultation

Now you can see how a well-designed racking system and carefully chosen accessories can transform even a small van.

So don’t miss out, contact us today for a non-binding consultation…

You won’t regret it! Syncro System has transformed over 100,000 vans, each one with a different, fully customised solution!


SEND YOUR REQUEST!!!



OUR CUSTOMER SERVICE TEAM WILL CONTACT YOU AS QUICKLY AS POSSIBLE.

CONTACT US FOR
A FREE OFFER