OUR VAST RANGE OF LINERS AND PANELLING

Good quality liners and panelling protect your van against the sort of wear and damage that inevitably occurs during regular use. Syncro liners and panels come in a choice of steel, three types of aluminium, plywood and plastic. With over 3,000 articles in our catalogue, we have the largest range of bodywork protection for vans on the market today!


PROTECTION FOR VANS, WITH OR WITHOUT RACKING

How van bodywork gets damaged
Typical bodywork damage
Damaged bodywork of the Fiat Doblò
New vans are supplied with virtually no bodywork protection, so that shifting or falling cargo can easily cause damage. With Syncro System van liners, this problem is solved, and your van’s bodywork effectively protected! Syncro liners are far stronger than thin bodywork panels and can easily absorb impacts with cargo, leaving your van’s body undamaged.

The Syncro catalogue contains a vast range of protective van liners

Plywood bulkhead liners
Wall liners
Door liners in painted steel
Our range includes BULKHEAD LINERS in non-slip, resin-bonded plywood with a marble-look or rubber-coated surface or in aluminium chequer plate and WALL AND DOOR LINERS in electrogalvanized and painted steel, aluminium, or honeycomb plastic.

Galvanised steel panels for maximum impact resistance

01_The exterior of the van fitted with Syncro liners after the incident
02_The Syncro panelling on the left of the van effectively protected its bodywork against damage
03_A closeup of the damage to the left side panels
04_The Syncro System panelling on the right of the van
05_The damaged steel panels removed for quick replacement

Ask Syncro System to protect your van’s bodywork with laser-cut galvanised steel panels. This type of panelling provides maximum protection for your van’s bodywork in the event of accidents or even violent collisions. The photos above show what happened inside a van carrying heavy equipment as a result of emergency braking to avoid a collision. As you can see, the load shifted and slid along the walls, but thanks to Syncro’s steel panelling, the van’s bodywork was not damaged in any way and repairs were both quick and cheap.


All our floor panels and interior liners come cut to size and predrilled, ready for installation

Fitting interior liners
Fitting wall liners
Fitting wall liners
Fitting door liners
The fully lined van

It only takes a few self-tapping screws and rivets, and a couple of hours, and the job is done. Your van will be fully lined in one or two hours at the most!


ROOF LINERS

A Crafter with floor, wall and roof liners
A roof liner in a Ducato
A Ducato with a roof liner

If you want to protect the roof of your van too, Syncro has everything you need. Syncro roof liners come cut to size and shape and predrilled. Roof liners are available in painted steel, various finishes of aluminium or in honeycomb plastic. All types provide effective protection against the sort of accidental impact damage that bulky cargo can cause. The photos above show painted steel roof liners in a Fiat Ducato and anodised aluminium roof liners in a Volkswagen Crafter.


OTHER PROTECTIVE PRODUCTS FOR VANS

A protective window grille
A protective grille on a rear door

Syncro’s window grilles protect your van’s door windows against accidental breakage.


BULKHEAD LINERS FOR PROTECTING YOUR VAN’S INTERIOR

A bulkhead liner in aluminium chequer plate
A bulkhead liner in marine-grade, resin-bonded plywood
A bulkhead liner in a Fiorino

You can protect the bulkhead between your van’s cargo compartment and cab with liners in marble-look or rubber-coated plywood or in aluminium chequer plate.


LINERS FOR VAN DOORS AND WINDOWS

Liners on a van door
A rear door with protective liners

You can protect and black out your van’s rear door windows with Syncro System door and window liners.


PERFORATED LINERS FOR HOOKS

A perforated wall liner for hooks
An interior liner with perforations for hooks

Syncro also supplies steel and aluminium wall liners in perforated versions for the application of hooks.


WHEEL ARCH LINERS

A wheel arch liner in steel and marine-grade plywood
A wheel arch liner in steel and aluminium chequer plate

Syncro wheel arch liners in steel and plywood or steel and aluminium chequer plate protect the most exposed parts of your van.


CAB ROOF STORAGE UNITS

A cab roof compartment with a door
Cab roof storage
Cab roof storage for high-body vans

This practical accessory transforms the space over the cab into useful, lockable storage. Units are supplied ready for installation. Versions for the Ducato, Jumper, Boxer and Daily are available.


SHAPED BULKHEAD LINER AND REAR BUMPER IN ALUMINIUM TREAD PLATE FOR THE 2006 DUCATO – JUMPER – BOXER

 A shaped bulkhead liner in aluminium chequer plate for the Ducato /Jumper /Boxer
A side view of the shaped bulkhead liner in aluminium chequer plate for the Ducato /Jumper /Boxer
Syncro’s non-slip rear bumper in aluminium tread plate for the Ducato /Jumper/boxer

Syncro’s shaped bulkhead liner in aluminium chequer plate for the 2006 Ducato – Jumper – Boxer follows the contours of the bodywork to provide effective protection for the bulkhead between the cargo compartment and the cab. The edges of the liner are covered by a plastic anti-scratch profile to protect the bodywork against scratching. The robust rear bumper in aluminium tread plate replaces the van’s original bumper. The bumper is available with or without parking sensors and with or without rubber buffers.


A RENAULT MASTER WITH A MARBLE-LOOK PLYWOOD FLOOR LINER AND ALUMINIUM CHEQUER PLATE BODYWORK LINERS

A Master with aluminium chequer plate door and wall liners
The Renault Master’s marble-look floor liner and interior liners
The fully lined right side of the Master

A DUCATO WITH A MARBLE-LOOK PLYWOOD FLOOR LINER, STEEL AND PLYWOOD WHEEL ARCH LINERS AND PAINTED STEEL BODYWORK LINERS

The lined interior of the Ducato
Wall liners in the Ducato
Bodywork protection in the Ducato
Protective liners in the Fiat Ducato

A FIORINO WITH A MARBLE-LOOK PLYWOOD FLOOR LINER AND PAINTED STEEL BODYWORK LINERS

A Fiorino with a marble-look plywood floor liner and painted steel bodywork liners
The left of the Fiorino, showing the floor and bodywork liners
The floor and bodywork liners on the right of the Fiorino
The Fiorino’s cargo compartment with marble-look plywood floor liner and painted steel bodywork liners

Syncro supplies a range of protective liners for all makes and models of van, pre-cut to shape and ready to install! See examples of floor and wall liners for the Fiorino, Citroen Nemo, Peugeot Bipper, Citan, Fiat Ducato, Fiat Talento, Fiat Doblo, Citroen Berlingo, Peugeot Partner, Caddy, Sprinter, Transit, Custom, Transporter, Combo, Connect, Daily, Master, Jumper, Trafic, Vito, Vivaro, Kangoo, Movano, Jumpy, Boxer, Expert, Crafter, Interstar, Primastar, Dokker, NV300, NV400, NV200, Toyota ProAce, Toyota ProAce City, NV250, Scudo, MAN TGE and other vans.