THE VAN RACKING SPECIALISTS
A fully customised racking solution in a Ford Transit for a key copying company
This page illustrates a particularly well thought out and fully customised racking solution. The van in question is a 2014 Ford Transit L3 H2 owned by a company that produces and sells key copying machines.
The customer wanted:
- to ensure the safety and efficiency of all equipment during transport, and to provide an efficient electrical power supply
- to use all available space to create a functional and tidy working environment, with work surfaces large enough to safely support all the machines needed
- to protect the interior of the van and make it more attractive
A fully customised racking solution improves productivity, reduces work times and ensures that machines and equipment are always readily accessible. It also helps you to deliver a higher quality service and keeps your van in top-top condition over time. Let’s examine, one by one, the special solutions devised by Syncro System for this van.
Using different materials to create a complete interior lining system
As always, let’s start with the interior liners fitted to this Transit. Liners are essential, but Syncro customers can choose from a range of different materials.
In this Transit L3 H2, the floor is covered by a marble-look plywood floor liner with certified non-slip stainless steel edge protectors.
The side walls and upper sections of the doors are covered with painted, galvanised steel panels that are shaped by laser cutting machines to provide maximum protection in the event of an accident.
The same material has also been used to line the underside of the roof, providing protection against impacts with cargo and tools and reflecting light more efficiently to help illuminate the entire load compartment. The bulkhead is protected by aluminium chequer plate panels, shaped to follow the contours of the van’s bodywork.
One special feature of this lining system is the stainless-steel bumper footplate at the rear doors. This not only reinforces the bumper to withstand the weight of heavy cargo but also provides a high-grip relief surface for extra user safety.
The Transit’s drawers, floor-level compartments and multi-purpose work surfaces
The solution installed in this Transit is a great example of how Syncro racking can be customised in any way and to fit any model of van! Twinned side panels have been used on two of the racking columns to give them a greater than usual depth of 67 cm. The customer’s aim in requesting this solution was to create work surfaces large enough to support the van’s key copying machines and to allow operators to work in safety and comfort.
Let’s take a closer look.
Left side. The racking is asymmetrical in depth on this side, being deeper opposite the side door, where no racking is installed, and narrower towards the rear doors. Large, open floor-level compartments are provided at the bottom of both columns. Above these are three modules of two drawers each, with a super-strong marble-look plywood work surface on top.
Right side. The racking on this side is of double depth and provides a larger number of enclosed storage compartments. The two identical columns start with floor-level compartments enclosed by two doors. Patented lift-and-rotate doors close the bottom sections while lift-up doors enclose the larger sections at the top. Further up are shelves with top-pivot doors and two drawers with non-slip mats and metal space dividers. A large, marble-look plywood panel forms the work surface, just like on the left of the vehicle.
A complete electrical wiring system for maximum functionality
Syncro System’s installation team dedicated a great deal of care and attention to this Transit’s electrical wiring system to ensure that all the power tools, electronic devices and key copying machines can be used anywhere on the worktops.
The right and left side walls of this Transit L3 H2 are equipped with three and four power outlets respectively. On request, Syncro can make your van fully autonomous by adding a generator with an inverter or an Ecoflow Power Station, which incorporates a battery, a charger and an inverter and can be connected to the mains supply, the vehicle battery or a photovoltaic panel on the roof if you wish to take advantage of a fully sustainable energy source.
Other accessories in the Transit: lighting technology for vans!
The last detail that perfects the looks and usability of this van is the lighting system.
Syncro System boasts an extensive catalogue of lighting accessories for the cargo compartment and adjacent areas. In this case, four LED tube lights are fixed to the roof liner panels. These consume very little energy, but ensure excellent, uniform illumination throughout the van’s interior.
Look here for other lighting, safety, cleaning, cargo retaining and ventilation accessories for your van.
Are your requirements unique? Just ask Syncro System. We can ALWAYS find a solution!
If you need a SPECIAL, tailor-made racking system for your van and worry that the perfect solution just doesn’t exist, think again! You’ll find it at Syncro System! Syncro has specialised exclusively in van racking since 1996. In under thirty years we have transformed over 100,000 vans, earning the applause of our customers for the quality of our service.
You can view other racking solutions for the Transit here.
You can find other special racking solutions here.
Don’t delay! Contact us now to get a non-binding quote for a fully customised racking system for your van!
SEND YOUR REQUEST!!!
OUR CUSTOMER SERVICE TEAM WILL CONTACT YOU AS QUICKLY AS POSSIBLE.
A FREE OFFER