… at least! In reality, the number of possible Syncro System racking configurations for the Fiat Ducato is virtually infinite. And every solution is fully customised to meet the needs of the individual customer. On this page we take a look at two vans, one new and one used. Syncro System racking can be installed in vans fresh out of the dealer, even before they are put onto the road, or in used vans in need of a new lease of life. Here, we examine one case of each scenario in the Fiat Ducato.
This Fiat Ducato came to Syncro System’s racking centre before ever being used on the road. It is owned by a firm that deals in industrial refrigeration systems. The first job we did was protect the interior. The floor is covered by a high grip, rubber-coated plywood floor liner, chosen to minimise the risk of slipping and falling. The area of floor near the bulkhead is further reinforced by a panel of aluminium tread plate in preparation for the loading, transport and unloading of heavy equipment and materials. The bulkhead itself is covered up to half height in marble-look plywood liners while the doors are lined with super-strong steel panelling.
After this first phase of bodywork protection, the Syncro team went on to install full-height racking on both sides of the van, mount container cabinets at the top of the bulkhead and add the accessories chosen by the customer.
In this case, Syncro System’s racking technicians found themselves working on a Fiat Ducato from 2006, a van that had already given plenty of service to its owner, who provides technical assistance for a chain of stores. In cases like this, the customer is free to decide whether to leave the old liners in place if they are fully functional, turning a blind eye to the looks,or have them removed and replaced with attractive new liners and panelling from Syncro.
The Syncro team is happy either way, so the decision is entirely up to the customer. In this case the vehicle’s owner chose to concentrate his investment on an all-new racking system covering both sides of the van.
The left side walls of both these Fiat Ducatos are fully occupied by Syncro racking and accessories. The structure of the racking is similar in both configurations, but the details make them look completely different.
The new Ducato: Both floor-level compartments are fitted with bottom doors featuring Syncro’s patented lift and rotate hinge system. This allows doors to fold down flat and provide unrestricted access. The provision of doors turns open compartments into efficient storage space. The racking also contains eleven shelves, including eight with non-slip mats and space dividers, one enclosed by a door and two top shelves. Then there are trays for six metal cases. Functionality is further enhanced by accessories on the rear-facing side panel: a spray can rack, a paper roll holder and a bar rack with a steel bracket and lashing strap.
The used Ducato: Here the two floor-level compartments are configured differently: that near the back of the van has a lift-up door with a parallelogram hinge while that near the bulkhead contains a case transport kit with a bar, strap, sliding fittings and end plate. This racking configuration too includes pull-out case trays: three double-case versions and three single-case versions, all with Syncro’s patented latch mechanism. Then there are seven shelves, in this case of the type designed to carry removable plastic containers. 47 of these are provided, in two different sizes. The racking is completed by a full-length top tray with an access door at the back, ideal for carrying long objects. The rear-facing side panel is equipped with three accessories: a paper roll holder, a liquid soap dispenser with holder and a multi-purpose metal pocket.
While the structure of the left-side racking was similar in both vans, that on the right is somewhat different.
The new Ducato: The floor-level compartment has a bottom door like those on the left. Above are six configurable shelves, including one at the top that runs for the full length of the racking. Also included is a van locker with lock and key for the secure storage of valuable electronic devices and work clothes. A pull-out vice bench is installed at exactly the right height for use from outside the van. The rear-facing side panel is equipped with a selection of metal and plastic hooks (that can be moved around as needed), a tilting document pocket and a first aid kit. The forward-facing side panel is fitted with a cabinet of tilting transparent containers and a bar rack with bracket and strap.
The used Ducato: This column of racking nearly mirrors that opposite it, with a floor-level compartment with door and four specially shaped shelves with plastic containers. Another shelf completes the column at the top. The rear-facing side panel is fitted with a bar rack with steel bracket and strap and a first aid kit.
Only the bulkhead of the new Ducato has been fitted with racking. This takes the form of a cabinet of 15 transparent containers, made from PMMA for maximum mechanical strength and resistance to UV light. These containers do not crack, chip or fade – ever! The bulkhead underneath the cabinet is equipped with a length of rail for attaching lashing straps and securing bulky equipment or materials. The floor in this area has been specially reinforced for this purpose.
This Ducato also features a ventilation grille in the floor and a series of LED lights under the roof. These two accessories greatly improve the functionality of the vehicle as they ensure an efficient exchange of air and excellent lighting under all conditions.
Syncro System are experts in exploiting of every inch of space inside your van and creating more besides, thanks to safe and efficient roof racks. Between 1996 and 2023, Syncro has found the perfect solution for over 90,000 around the world!
On the new Fiat Ducato, Syncro also installed a roof rack formed by aluminium cross bars, side fences and a rear loading roller. The front cross bar is fitted with Syncro’s Ultrasilent rubber profile to reduce noise and vibration on the road – the only solution of its kind on the market and a great contribution to driver comfort!
Look here for other Fiat Ducato racking solutions.
If you have just purchased a Fiat Ducato or if you need to give your old Ducato a new lease of life, just ask Syncro System for a free consultation and a fully personalised racking solution.
Invest in the future of your business now and enjoy a rapid, professional service!